Counter-indicator

Counter-indicator

Counter-indicator is designed for registration and display of information on the operation of the vehicle.
To display the measured and registered parameters it is equipped with a graphical LCD indicator with a backlight for work in the dark. Switching the menu modes is carried out using the button located on the body of the device. Indication of the current mode is carried out by selecting the corresponding icon with an inscription on the graphic LCD indicator.

ATTENTION!!! counter-indicator is produced in two versions - with Interface RS-232 or RS-485.

The device works by protocol Modbus / Omnicomm.


Counter-indicator allows:
• сontrol of fuel in the tanks of vehicles, when it is necessary to register the rest of the fuel in the tank;
• monitor the fuel flow through the flowmeter;
• control mileage, driving time, idle time;
• control the machine hours, the operating time of the equipment;
• monitor technological parameters - RPM, speed, etc .;
• manage settings without human intervention for a given algorithms;
• signal to personnel when the parameter is out of tolerance range, for example, the signaling of a barrel group filling;
• to solve the tasks of dosing, for example, switching off the pump if the tank is full;
• allows you to save the history of change of the fuel level (volume).

Counter-indicator is designed for registration and display of information on the operation of the vehicle.
To display the measured and registered parameters it is equipped with a graphical LCD indicator with a backlight for work in the dark. Switching the menu modes is carried out using the button located on the body of the device. Indication of the current mode is carried out by selecting the corresponding icon with an inscription on the graphic LCD indicator.

ATTENTION!!! counter-indicator is produced in two versions - with Interface RS-232 or RS-485.

The device works by protocol Modbus / Omnicomm.


Counter-indicator allows:
• сontrol of fuel in the tanks of vehicles, when it is necessary to register the rest of the fuel in the tank;
• monitor the fuel flow through the flowmeter;
• control mileage, driving time, idle time;
• control the machine hours, the operating time of the equipment;
• monitor technological parameters - RPM, speed, etc .;
• manage settings without human intervention for a given algorithms;
• signal to personnel when the parameter is out of tolerance range, for example, the signaling of a barrel group filling;
• to solve the tasks of dosing, for example, switching off the pump if the tank is full;
• allows you to save the history of change of the fuel level (volume).

 Name  Value
Power
Power voltage 10...30V
Current consumption up to 100 mA
 Inputs/outputs 
Number of digital inputs, pcs. 4
Range of measured frequencies, Hz  20-10000
The basic resulted error of measurement,%  0.1
Number of analog inputs, pcs.: 4
AIN1 AIN2, V 0-10
AIN3 AIN4, V 0-30
The basic resulted error of measurement,% 0.1
Number of digital outputs (for equipment control): 2*
 Output type open source
 Maximum load current, mA 500
Maximum switching voltage, V 30
Interfaces
RS485** 1
RS232** 1
1-Wire 1
Parametres of RS485 and RS232
Data transfer protocol Omnicomm, MODBUS
General characteristics
Overall dimensions, mm 70x45x130
Weight, kg no more as 0.5
Operating temperature range, ° С -40 - +80

* 2 outputs are combined with 2 frequency inputs (DIN3 / DOUT1; DIN4 / DOUT2).

** Only one of the specified interfaces can be installed in the device at a time.

 
Write to us
+375 44 294-50-97